TARO MÁY HSS-E M8 CHO ĐẦU KẸP ĐỒNG BỘ GARANT

Description Version: Sturdy version with right-hand helix and shank to DIN 1835-B. Special geometry for use on machines with synchronised spindle drives. The tap is guided by the synchronised spindle on the machine. Special TiAlN-S coating for optimum tool life. For use with emulsion (fat content minimum 8%). Form E (lead chamfer: 1.5 - 2 turns) for the deepest possible thread depths. Recommendation: For TOOLOX materials we recommend deviating from the DIN data (see table) by drilling the tapping hole ⌀ 0.05 to 0.3mm larger. Note: For use on synchronised spindles, the GARANT quick-change tapping chuck No. 338100 − 338121 with minimum length adjustment (MLA) ensures very high process reliability. Thread type: M Tool material: HSS E PM Standard: Manufacturer’s standard Tolerance class: ISO 2X 6HX Thread pitch: 1.25 mm Overall length L: 90 mm Shank ⌀ Ds : 8 mm Shank square □: 6.2 mm Tapping hole ⌀: 6.8 mm Technical description Thread pitch 1.25 mm Number of clamping slots 4 Tapping hole ⌀ 6.8 mm Number of cutting edges Z 4 Thread ⌀ 8 mm Standard Manufacturer’s standard Shank ⌀ Ds 8 mm Overall length L 90 mm Shank square □ 6.2 mm Tolerance class ISO 2X 6HX Tool material HSS E PM Thread depth 20 mm Thread type M Thread size M8 Coating TiAlN Flank angle 60 degrees Thread standard DIN 13 Taper lead form E Helix angle 40 degrees Shank DIN 1835 B to h6 Through-coolant no Application for type of drilling up to 2.5×D for blind holes Cutting direction right-hand Shank tolerance h6 Type of threading tool Machine tap for synchronous machining Colour ring red Type of product TapGiá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....