MŨI ĐỤC SẮT ĐẦU DẸP 10MM DÀI 120MM PB SWISS TOOLS 741000 120

Version: Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection). Torque adjustment without using tools just pull the cap and turn it. The torque setting is displayed in a window (digital display at the end of the handle). Built-in electronics with NFC interface. Battery can be replaced by the customer (button cell CR 1/3 N; 3V). Units of measure: Nm, lbfft. To take 6 mm interchangeable blades (No. 659920 − 659928). Application: For controlled tightening of screws to a pre-set torque. Standard: Tested to DIN EN ISO 6789. Note: The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789. ----------- maximum torque 500 cNm Direction of tightening Right-hand tightening Torque measuring accuracy ±6 % Test certificate Manufacturer’s test certificate Calibration O1 Overall length L 126 mm Torque range 100 cNm - 500 cNm Torque range 1 Nm - 5 Nm Resolution 5 cNm suitable interchangeable blades 6 mm Display digital Release signalling akustisk; haptisk Trigger principle mechanical slip clutch Connection format exchangeable blade Measurement technology mechanical Data can be recorded no Setting the trigger value digital, adjustable Feedback triggering Reversible reading Nm; lbfft Measurement process Torque Adjustable trigger value adjustable Standard DIN EN ISO 6789 Weight 101 g Type of product Torque screwdriver Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....