Mô Đun Điều Khiển Sạc Pin 10a 6-60v
Mô Đun Điều Khiển Sạc Pin 10a 6-60v
Mô Đun Điều Khiển Sạc Pin 10a 6-60v
Mô Đun Điều Khiển Sạc Pin 10a 6-60v
Mô Đun Điều Khiển Sạc Pin 10a 6-60v
Mô Đun Điều Khiển Sạc Pin 10a 6-60v
Mô Đun Điều Khiển Sạc Pin 10a 6-60v
1 / 1

Mô Đun Điều Khiển Sạc Pin 10a 6-60v

4.6
9 đánh giá

Feature: 💛Lease contact us to get detail💛 1.Support Lead-acid battery and Acting Battery,voltage range:6V~60V; 2.Can display voltage,percent of battery,charging time at the same time through LCD 3.The function is very powerful,realizes the automatic charge control,

126.000₫
-34%
83.293
Share:
yoodada.vn

yoodada.vn

@yoodada.vn
4.8/5

Đánh giá

2.996

Theo Dõi

4.959

Nhận xét

Feature: 💛Lease contact us to get detail💛 1.Support Lead-acid battery and Acting Battery,voltage range:6V~60V; 2.Can display voltage,percent of battery,charging time at the same time through LCD 3.The function is very powerful,realizes the automatic charge control,the control charge time, also may set up and uploads the corresponding parameter through the serial port Specifications: Product Model:XY-L10A Control voltage:DC6-60V Control current:<10A Control accuracy:0.1V Output Type: Direct Output Voltage error:±0.1V Scope of application: various lithium batteries 一.Function description 1.Automatic Charge control function: By setting the volt-HI:‘UP’ volt-LI:‘dn’;When the battery voltage is below the volt-LI:’dn’,the relay leads,the charger begins to charge the battery;when the battery voltage is up to volt-HI:’UP’,the relay is diconnected and the automatic charge is completed once 2.Charge Time Control Function: How to turn on the time control function? After entering the parameter set, set the parameter op is non-zero, then turn on the time control function, op default parameter is:--:--h, the default does not turn on time control function; After the opening Time control function (OP is non-zero), when the battery voltage is the lower volt-LI’dn’, the charger began to charge the battery, the system began to clock; During the timing, the battery voltage ≥ volt-HI’UP’, relay disconnect; If the OP time is up, the battery voltage is still the lower volt-LI’dn’, the relay keeps the conduction, automatically closes the charge time control function, and flashes the H:ER to remind the user, the time parameter setting is unreasonable; Press any key to stop flashing; Note: Time format: 00:59 (00 for hours, 59 for minutes) The maximum time is 99:59, which is 100 hours. Note: Please allow 1-3mm error due to manual measurement.pls make sure you do not mind before you bid. Due to the difference between different monitors,the picture may not reflect the actual color of the item.Thank you! Package Includes: 1x Battery Charger Control Module

Sản Phẩm Tương Tự

*Sản phẩm được thu thập tự động để tiếp thị. Chúng tôi không bán hàng.