FC130SA Mini Motor 3÷24V tích hợp Encoder

The characteristics of this motor are as follows: - Mabuchi Motor, a first-line brand of micro motors, the motor is used in laser printers, industrial quality. Standard model FC130SA, weight about 20g, copper carbon brush (long wear life), exquisite workmanship, pressure sensitive, limit copper ring and many nylon gaskets, see the picture below for the specific size. - 334-line AB phase encoder, including shaping circuit, the output is a very steep square wave, no overshoot, and can be directly connected to the IO of the microcontroller. - The encoder works normally at 1.8V-3.3V (when it is 5v, it is recommended to use a linear voltage regulator chip to step down or modify the current limiting resistor R1 of the transmitting tube on the encoding circuit, which is currently 82 ohms, and the red transmitting tube on the circuit mainly consumes Electricity, it is recommended to use a linear voltage regulator chip to step down the voltage. Directly changing the current limiting resistor requires strong hands-on ability, otherwise it will be easily damaged), square wave specification, and the measured power consumption at 3.3V is 21ma (mainly the power consumption of the emission tube, the voltage drop of the red LED is about 1.5v, 3.3-1.5/82=21ma), the encoder emits red light after power on, very beautiful, AB phase output, judge the level of the other party when the rising or falling edge of phase A or B, you can judge The direction of rotation of the motor. ----------------------------------------------------------------------------- Linhkien.CXT.VN – Linh kiện điện tử CXT - Chuyên cung cấp linh kiện điện tử, thiết bị và vật tư ngành điện - Thông tin minh bạch, giá cả cạnh tranh - Hỗ trợ tư vấn kỹ thuật triển khai dự án - Hotline & Zalo: 0343 75 2012