CỜ LÊ MIỆNG, VÒNG STAHLWILLE 13 MM-613500_13

Version: Sturdy compact one-armed torque wrench, adjustable to scale and self-triggering. The accuracy is sustained for many thousands of operations, because high quality material is used for all wearing parts with stressed parts loaded only briefly on each occasion. Body and handle are of sturdy square section. Scales adjustable. Anti-clockwise tightening by pushing through the drive shankWithout any plug-in head (basic model); see No. 657582 − 657950 for suitable plug-in heads. Units of measure: Nm, lbfft. Advantage: Ergonomically shaped two-component handle, resistant to aggressive liquids such as fuel, Skydrol etc. The adjustment scale is placed behind a sight glass for protection against dirt and damage. Quick, precise, and reliable setting: Pull the setting knob, “Twist” to set the desired value and “Press” to save it. Setting knob moves easily since there is no spring pressure to be overcome. Function: If the set value is reached while using the wrench, the wrench triggers giving a “signal” (acoustic and perceptible) and is then immediately ready for use again. Application: Since the set torque can be varied, it is ideal for repairs and short series production. Standard: Tested to DIN EN ISO 6789. Note: The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789. ----------- maximum torque 200 Nm Direction of tightening For right and left-hand tightening Torque measuring accuracy ±3 % Exchangeable tool Plug-in head Test certificate Manufacturer’s test certificate Calibration O1 Series MANOSKOP 730N Overall length L 467 mm Torque range 40 Nm - 200 Nm Torque range 30 lbfft - 150 lbfft Scale graduation, 1 graduation = 1 Nm Weight 1,264 g Adjusted reference dimension on the torque wrench [l2] 25 mm Socket for plug-in head 14×18 mm Display analogue Release signalling akustisk; haptisk Trigger principle mechanical short-travel release Connection format for plug-in heads (rectangular socket) Measurement technology mechanical Data can be recorded no Setting the trigger value with adjustment scale Feedback triggering Reversible reading Nm; lbfft Measurement process Torque Adjustable trigger value adjustable Standard DIN EN ISO 6789 Lever length without plug-in head [l1] 424 mm Lever length including factory calibration reference dimension [l3] 449 mm Type of product Torque Wrench Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....