2Pieces For Garage Gate 433MHZ Wireless Remote Control Duplicator Clone Code Scanner Key 4 Channel

- Method of operation - 1, clearing method: - Press and hold the A button and the B button at the same time (some button symbols are the up button and the down button). The LED indicator flashes three times, release any button, the other button does not release, the released button clicks three times, the LED indicator Enter the fast flashing state, at this time the memory data is completely cleared. After clearing the data, the remote control, no matter which button is pressed, the LED indicator is not lit. - 2, the copy method: - One hand holds the original remote control, the other holds the remote control, and the two remotes are as close as possible. (ideally, the two remotes are placed on the desktop with the zero distance on the side.) Press the desired button. The LED indicator flashes rapidly after three flashes, and the copy is successful. The other buttons operate in the same way. Some operating environments have interference, and should avoid the interference operation. If the copying is not good, copy it again after clearing the code. (It's especially important: the remote control on your hand must work properly and be the same frequency as our remote control) - - Package Includes: - 2 Pieces Remote Control Duplicator - - Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....